Item # SIMSTB2-252144SS
1/4" X 2-1/4" SIMPSON STRONG-BOLT 2 WEDGE ANCHOR 304SS
Click image to enlarge
Item # SIMSTB2-252144SS
1/4" X 2-1/4" SIMPSON STRONG-BOLT 2 WEDGE ANCHOR 304SS
- UM: EA
The SIMSTB2-252144SS is a Simpson Strong-Tie Strong-Bolt 2 wedge anchor: 1/4" diameter x 2-1/4" length, Type 304 Stainless Steel, Type 304 Stainless finish. Used for anchoring into solid concrete in structural, equipment-mounting, and utility installations.
Specifications
| Spec | Value |
|---|---|
| Anchor diameter | 1/4" |
| Length | 2-1/4" |
| Drill bit size | 1/4" |
| Minimum embedment | 1-1/8" |
| Install torque | 4 ft-lbs |
| Minimum concrete thickness | 2-1/4" |
| Material | Type 304 Stainless Steel |
| Finish | Type 304 Stainless |
| Code listing | ICC-ES ESR-3037 (concrete), seismic categories A-F |
Installation Summary
- Drill a 1/4" hole at least 1-1/8" deep using a carbide-tipped SDS or hammer drill bit.
- Clean the hole with compressed air or a blow-out pump.
- Insert the anchor through the fixture into the hole until the wedge clip reaches the bottom.
- Tighten the nut to 4 ft-lbs using a calibrated torque wrench.
- Verify the fixture is firmly seated against the concrete with no gap.
Stocked at Eugene Fastener & Supply. Same-day shipping on orders before 2 pm Pacific. Will-call pickup available at our Eugene, Oregon warehouse.
Helpful Resources
- Wedge Anchor Selection & Installation Guide
- Concrete Anchor Drill Bit & Hole Size Chart
- Wedge Anchor vs Sleeve Anchor Comparison
- Concrete Anchor Selection Guide
Need volume pricing or submittals? Email sales with diameter, length, finish, and quantity.
Specifications
| Brand | Simpson Strong-Tie |
| Diameter | 1/4 |
| Length | 2-1/4 |
| Drill Size | 1/4 |
| Finish | Type 304 Stainless |
| Material | Type 304 Stainless Steel |
| Part Number | SIMSTB2-252144SS |
Documents
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.