Item # GR5FHN1/2-13ZP
1/2" - 13 GRADE 5 FINISHED HEX NUT NC ZINC PLATED
Click image to enlarge
Item # GR5FHN1/2-13ZP
1/2" - 13 GRADE 5 FINISHED HEX NUT NC ZINC PLATED
- UM: EA
The 1/2-13 Grade 5 hex nut is a unc-thread hex nut in a zinc finish stocked at Eugene Fastener & Supply. Part of our full hex nuts selection.
At a glance
| Wrench size (across flats) | 3/4" |
| Thread | 1/2-13 UNC (Coarse) |
| Grade | Grade 5 |
| Material | Steel |
| Finish | Zinc |
Good to know
- Use with Grade 5 bolts/studs — match or exceed the bolt grade so the nut is never the weak link.
- Coarse (UNC) thread — faster to install and more tolerant of nicks and corrosion.
- The standard six-sided nut for general bolting; size the wrench to the width across flats shown above.
- Zinc-plated for general indoor and light-outdoor corrosion resistance.
Other sizes in this series — Grade 5 Hex Nuts
| Size | Part # | Wrench |
|---|---|---|
| 5/16-18 (ZP) | GR5FHN5/16-18ZP | 1/2" |
| 3/8-16 (ZP) | GR5FHN3/8-16ZP | 9/16" |
| 3/8-24 (ZP) | GR5FHN3/8-24ZP | 9/16" |
| 1/2-13 (PL) | GR5FHN1/2-13PL | 3/4" |
| 1/2-13 (ZP) (this page) | GR5FHN1/2-13ZP | 3/4" |
| 1/2-20 (ZP) | GR5FHN1/2-20ZP | 3/4" |
| 5/8-11 (ZP) | GR5FHN5/8-11ZP | 15/16" |
| 7/8-9 (ZP) | GR5FHN7/8-9ZP | 1-5/16" |
| 1-12 | GR5FHN1-12 | 1-1/2" |
| 1-8 (PL) | GR5FHN1-8PL | 1-1/2" |
| 1 1/8-7 (PL) | GR5FHN11/8-7PL | 1-11/16" |
| 1 1/8-7 (ZP) | GR5FHN11/8–7ZP | 1-11/16" |
| 1 1/4-7 (ZP) | GR5FHN11/4-7ZP | 1-7/8" |
Need a different material, finish, or thread, or bulk pricing? Contact our sales team, or view all hex nuts. Eugene Fastener & Supply, since 1969.
Specifications
| Diameter | 1/2 |
| Thread pitch | 13 |
| Material | Steel |
| Finish | Zinc |
| Grade | UNC (Coarse) |
| Thread | Hex Nuts |
| ASME B18.2.2 | |
| Grade 5 |
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.