Item # RNN050C3SS
1/2-13 UNC FLANGE KNURLED BODY RIVETNUT, 0.350-0.500" GRIP, 18-8 STAINLESS STEEL
Item # RNN050C3SS
1/2-13 UNC FLANGE KNURLED BODY RIVETNUT, 0.350-0.500" GRIP, 18-8 STAINLESS STEEL
- UM: EA
- Brand: RIVETKING
The RNN050C3SS is a 1/2-13 18-8 stainless steel flange-style knurled body rivet nut from the RivetKing IKF (low profile head) thinwall series. Designed for blind installation in sheet metal and panel applications where threads are needed but back-side access is impractical, this rivet nut installs from one side of the workpiece and provides a permanent threaded socket once set.
Typical applications: Used in heavy equipment, frame and chassis applications, structural attachments, equipment skirting, and any application requiring high pull-out strength and torque resistance. The 18-8 stainless steel material is well-suited to marine, food processing, outdoor exposure, medical equipment, chemical processing, corrosion-prone environments.
Understanding Grip Range
Specifications
| Property | Value |
|---|---|
| Thread Size | 1/2-13 UNC |
| Material / Finish | 18-8 Stainless Steel |
| Series | IKF (RivetKing thinwall, low-profile head, knurled body) |
| Grip Range | 0.350-0.500" |
| Recommended Drill / Hole Size | 0.688" |
| Head Diameter | 0.865" |
| Body Diameter | 0.685" |
| Length (open end) | 1.450" |
| RivetKing Part # | 50C3IKF3P |
Related Parts in This Family
Match your panel thickness to a grip range below, or switch material for your environment. The highlighted row is the part you're viewing now.
| Part # | Grip | Material | Use When |
|---|---|---|---|
| RNN050C2SS | 0.200-0.350" | 18-8 SS | Shorter grip (same material) |
| RNN050C3SS ← current | 0.350-0.500" | 18-8 SS | Panel 0.350-0.500" |
| RNN050C3AP | 0.350-0.500" | Aluminum | Lighter / mild corrosion |
| RNN050C3SY | 0.350-0.500" | Steel YZ | General industrial / cost |
| ATN050C1SY | Universal | Steel YZ (ISR) | Blind hole / unknown panel thickness |
Installation: Drill a 0.688" hole in the workpiece. Insert the RNN050C3SS from the accessible side and set with a rivet nut tool — the body collapses against the back side of the panel and the knurled flange grips the front side to prevent rotation under torque. Recommended grip range is 0.350-0.500" (sheet thickness).
For step-by-step instructions: see our How to Install Rivet Nuts guide for the complete process, common mistakes, and verification tips.
Tool selection: Pneumatic, hydraulic, or pneudraulic rivet nut tools are recommended for this size — manual tools are not practical due to the force required to set the larger threaded body. Both spin-spin and spin-pull tool types are compatible with the IKF series.
Drill bit needed: 0.688" (11/16"). We stock the matching Triumph bit — TRI94144 — ships same day with your rivet nuts. Full drill bit chart.
Technical Notes
| Property | Value |
|---|---|
| Recommended Bolt Torque | 660 in-lbs (per RivetKing Rev. B test data) for steel bolts. Stainless thread engagement may require slightly lower values to prevent galling. |
| Static Pull-Out Strength | 2,000 lbf in 0.062″ steel sheet |
| Push-Out Strength | 3,700 lbf in 0.125″ steel sheet |
| Spin-Out Resistance (anti-rotation) | 320 in-lbs in steel |
| Note for stainless variant | Performance values shown are for steel zinc baseline. Stainless 18-8 typically delivers comparable pull-out with slightly lower torque-out resistance; use anti-seize on bolt threads to prevent galling. |
| Hole Tolerance | +0.006″ / -0.000″ (per RivetKing 2025 catalog) |
| Material Certification | 18-8 Stainless Steel (300 Series) |
| Installation Tool Compatibility | Compatible with spin-pull or spin-spin rivet nut installation tools. Knurled body collapses against panel back-side during setting. |
| Installation Reference | See our step-by-step installation guide for the complete process and verification methods. |
Performance values per RivetKing Rev. B test data (May 2023), tested in zinc-plated steel installed in flat sheet stock under laboratory conditions. Actual performance in your application varies with panel material, hole tolerance, installation, and environmental factors. Reference only — not for use as design loads without independent validation. See full performance reference and disclaimer.
Manufacturer Cross-References
| Manufacturer | Part Number |
|---|---|
| RivetKing | 50C3IKFSS |
| Industrial Rivet & Fastener | 50C3IKFSS |
| AVK / Atlas / Marson / Sherex | Equivalent versions available — call for specific cross-reference |
| Brighton-Best (BBI) | (BBI crossover available — call for cross-reference) |
Searching for a different brand? Eugene Fastener can cross-reference RivetKing IKF parts to AVK, Sherex, POP/Avdel, Goebel, and other major rivet nut manufacturers. Call us with any part number for a same-day match.
Rivet Nut vs. Other Threaded Inserts
| Type | Best For | Limitations |
|---|---|---|
| Rivet Nut (this part) | Permanent threads in sheet metal, blind installation, one-side access | One-shot install; needs proper drill size and deburr |
| Plus Nut / Jack Nut | Soft or brittle panels (plastic, fiberglass, drywall) | Lower torque ratings than rivet nuts; not for steel panels |
| Well Nut | Vibration damping, waterproofing in thin panels | Rubber body limits load capacity and temperature range |
| PEM (self-clinching) | High-volume sheet metal production at the press | Requires press tooling; not a blind/field install |
See the full comparison guide for detailed pros, cons, load tables, and decision criteria.
Helpful resources: Selection Guide · Drill Bit & Hole Size Chart · Tool Selection Guide · How to Install · Rivnut vs. Plus / Jack / Well / PEM Comparison.
In stock at Eugene Fastener & Supply. Shipping nationwide. Same-day shipping on orders placed before 2pm Pacific.
| Diameter | 1/2 |
| Thread Pitch | 13 |
| Material | Stainless |
| Min Grip | 0.350 |
| Max Grip | 0.500 |
| Hole Diameter | 0.688 |
| Finish | Plain |
| Thread Type | Coarse |