Item # KEP1/4-28ZP
1/4" - 28 STAR LOCKNUTS W/ EXTERNAL TOOTH LOCKWASHER, NF, ZINC PLATED
$0.15000 / EA
- Minimum Order Qty: 100.00
- Must Order in Multiples of: 100.00
- Pkg Qty: 100.00
- Case Qty: 2,400.00
- Bulk Qty: 3,500.00
- Log in to see if custom discounts apply
Click image to enlarge
Item # KEP1/4-28ZP
1/4" - 28 STAR LOCKNUTS W/ EXTERNAL TOOTH LOCKWASHER, NF, ZINC PLATED
- UM: EA
The 1/4-28 K-lock (Keps) nut is a unf-thread K-lock (Keps) nut in a zinc finish stocked at Eugene Fastener & Supply. Part of our full lock nuts selection.
At a glance
| Wrench size (across flats) | 7/16" |
| Thread | 1/4-28 UNF (Fine) |
| Material | Steel |
| Finish | Zinc |
Good to know
- Fine (UNF) thread — higher tensile strength and better resistance to loosening than coarse.
- A captive external-tooth star washer speeds assembly and bites the surface to resist loosening — common in electrical and sheet-metal work.
- Zinc-plated for general indoor and light-outdoor corrosion resistance.
Other sizes in this series — K-Lock (Keps) Nuts
| Size | Part # | Wrench |
|---|---|---|
| GR2RLN#10-32ZP | GR2RLN#10-32ZP | |
| #10-32 | KEP#10-32ZP | 3/8" |
| 1/4-20 | KEP1/4-20ZP | 7/16" |
| 1/4-28 (this page) | KEP1/4-28ZP | 7/16" |
| 5/16-18 | KEP5/16-18ZP | 1/2" |
| 5/16-24 | KEP5/16-24ZP | 1/2" |
| 3/8-16 | KEP3/8-16ZP | 9/16" |
| 3/8-24 | KEP3/8-24ZP | 9/16" |
| 3-0.50 | MKNM3-0.50ZP | |
| 4-0.70 | MKNM4-0.70ZP | |
| 4-40 | KEP#4-40ZP | |
| 5-0.80 | MKNM5-0.80ZP | |
| 6-1.00 | MKNM6-1.00ZP | |
| 6-32 | KEP#6-32ZP | |
| 8-1.25 | MKNM8-1.25ZP | |
| 8-32 | KEP#8-32ZP | |
| 10-24 | KEP#10-24ZP |
Need a different material, finish, or thread, or bulk pricing? Contact our sales team, or view all lock nuts. Eugene Fastener & Supply, since 1969.
Specifications
| Diameter | 1/4 |
| Thread pitch | 28 |
| Material | Steel |
| Finish | Zinc |
| Part Number | UNF (Fine) |
| Thread | Lock Nuts |
×
This website uses cookies to ensure you get the best user experience. By continuing to use this site, you agree to our
cookies and terms of use policy.